1 channel DALI LED dimmer 16A for DIN-EN 60715 TH35 rail mounting

Item condition	New
Manufacture name	1 channel DALI LED dimmer 16A for DIN-EN 60715 TH35 rail mounting
Brand	ELTAKO
Categories	Switches
Country of origin	BG
Harmonized System Code	8542 3190 00
Assembly arrangement	Basic element
Method of operation	Push button
Nominal voltage	12-48 V
Suitable for degree of protection (IP)	IP20
Device width	17.5 mm
Device height	98 mm
Device depth	56 mm
Max. switching power LED	768 W

Packing level 1

4010312321584, 4010312321584

Mounting method	DRA (DIN-rail adapter)
Colour	Grey
Halogen free	Yes
Connection type	Push-in clamp
Surface protection	Untreated
Material quality	Thermoplastic
Material	Plastic
Light value memory	Yes
Substation input	No
Serial dimmer	No
Applicable with movement sensor	No
Applicable with transmission button	No
Applicable with infrared button	No
Applicable with presence indicator	No
Applicable with button	No
Applicable with time switch/timer	No
Control voltage	9.5-22.5 V
Transparent	No
Surface finishing	Matt
Core cross section	1.5-2.5 mm²
IFTTT support available	No
Dimming phase cut-off	No
Dimming phase cut-on	No
App control via Bluetooth	No
Nominal power resistive load	768 W
Compatible with Apple HomeKit	No
Compatible with Google Assistant	No
Compatible with Amazon Alexa	No

1 channel DALI LED dimmer for DIN-EN 60715 TH35 rail mounting. 98x17,5x56mm. Protection class IP20. Only 0.12 watt standby loss. Designed to control constant voltage LED modules (CV) at operating voltages of 12V to 48V, Sw&Dim or SwitchDim2: Operation via 1 or 2 pushbutton inputs permits brightness control without DALI. Alternatively, corridor function for direct activation with a motion detector. Dimming range 0.1%-100%. Switchable PWM frequency (122Hz/244Hz/488Hz/976Hz). Supply voltage 12V to 48V DC. Max. connected current 16A. High efficiency. Configuration via DALI Cockpit PC software and DALI USB interface. Operating modes: The output channel is controlled by a DALI address (Device Type 6). Alternatively, it can also be operated by one (Sw&Dim) or two pushbutton inputs (SwitchDim2). SwD1, Sw&Dim: brightness. Press pushbutton briefly: On/Off. Press pushbutton long: Dim. SwD2: Scene switch (press pushbutton briefly). If you press the SwD1 input for 2 minutes, the mode changes to Corridor function. This operating mode remains enabled until the device is disconnected from the power supply (after PowerUp: operation via SwD1/SwD2). Corridor function: Mode with integrated staircase time switch (e.g. simple activation of one or several motion detectors by relay contact). When you press the input, the maximum value is switched on. After the input signal decays, the brightness remains at this value for the duration of the hold time before it drops down to the intermediate value. After the hold time for the intermediate value expires, brightness returns to the basic value. The process starts from the beginning when the input is re-activated. The DALI Cockpit software can configure 1-channel LED dimmers. You can define both group assignment and configure scene values and DALI parameters (the parameters displayed are the as-delivered states). As-delivered state: Before the first address is assigned, you can control the device using the group address G0. This preset group assignment is deleted when addresses are assigned. Afterwards, you can define any group assignment in the DALI Cockpit. The values defined in the DALI standard are generated by sending a DALI reset command.