Technical Information
Item condition |
New |
Manufacture name |
1 channel DALI LED dimmer 8A for flush-mounted box |
Brand |
ELTAKO
|
Categories |
Switches
|
Country of origin |
BG |
Harmonized System Code |
8542 3190 00
|
Assembly arrangement |
Basic element |
Method of operation |
Push button |
Nominal voltage |
12-48 V |
Suitable for degree of protection (IP) |
IP20 |
Device width |
33 mm |
Device height |
59 mm |
Device depth |
15 mm |
Max. switching power LED |
384 W |
Packing details
Packing level 1 |
4010312321515, 4010312321515 |
Other Technical data
Mounting method |
Other |
Colour |
Grey |
Halogen free |
Yes |
Connection type |
Push-in clamp |
Surface protection |
Untreated |
Material quality |
Thermoplastic |
Material |
Plastic |
Light value memory |
Yes |
Substation input |
No |
Serial dimmer |
No |
Applicable with movement sensor |
No |
Applicable with transmission button |
No |
Applicable with infrared button |
No |
Applicable with presence indicator |
No |
Applicable with button |
Yes |
Applicable with time switch/timer |
No |
Control voltage |
9.5-22.5 V |
Transparent |
No |
Surface finishing |
Matt |
Core cross section |
1.5 mm² |
IFTTT support available |
No |
Dimming phase cut-off |
No |
Dimming phase cut-on |
No |
Min. depth of built-in installation box |
15 mm |
App control via Bluetooth |
No |
Nominal power resistive load |
384 W |
Compatible with Apple HomeKit |
No |
Compatible with Google Assistant |
No |
Compatible with Amazon Alexa |
No |
Downloads
Description
1 channel DALI LED dimmer for luminary installation and flush-mounted box. 59x33x15mm. Protection class IP20. Only 0.12 watt standby loss. Designed to control constant voltage LED modules (CV) at operating voltages of 12V to 48V, Sw&Dim or SwitchDim2: Operation via 1 or 2 pushbutton inputs permits brightness control without DALI. Alternatively, corridor function for direct activation with a motion detector. Dimming range 0.1%-100%. Switchable PWM frequency (122Hz/244Hz/488Hz/976Hz). Supply voltage 12V to 48V DC. Max. connected current 8A. High efficiency. Configuration via DALI Cockpit PC software and DALI USB interface. Operating modes: The output channel is controlled by a DALI address (Device Type 6). Alternatively, operation can also take place by one (Sw&Dim) or two pushbutton inputs (SwitchDim2). SwD1, Sw&Dim: brightness. Press pushbutton briefly: On/Off. Press pushbutton long: Dim. SwD2: Scene switch (press pushbutton briefly). If you press the SwD1 input for 2 minutes, the mode changes to Corridor function. This operating mode remains enabled until the device is disconnected from the power supply (after PowerUp: operation via SwD1/SwD2). Corridor function: Mode with integrated staircase time switch (e.g. simple activation of one or several motion detectors by relay contact). When you press the input, the maximum value is switched on. After the input signal decays, the brightness remains at this value for the duration of the hold time before it drops down to the intermediate value. After the hold time for the intermediate value expires, brightness returns to the basic value. The process starts from the beginning when the input is re-activated. The DALI Cockpit software can configure 1-channel LED dimmers. You can define both group assignment and configure scene values and DALI parameters (the parameters displayed are the as-delivered states). As-delivered state: Before the first address is assigned, you can control the device using the group address G0. This preset group assignment is deleted when addresses are assigned. Afterwards, you can define any group assignment in the DALI Cockpit. The values defined in the DALI standard are generated by sending a DALI reset command.