DALI LED dimmer 8A tunable white for flush-mounted box

Item condition	New
Manufacture name	DALI LED dimmer 8A tunable white for flush-mounted box
Brand	ELTAKO
Categories	Switches
Country of origin	BG
Harmonized System Code	8542 3190 00
Assembly arrangement	Basic element
Method of operation	Push button
Nominal voltage	12-48 V
Suitable for degree of protection (IP)	IP20
Device width	33 mm
Device height	59 mm
Device depth	15 mm
Max. switching power LED	384 W

Packing level 1

4010312321461, 4010312321461

Mounting method	Other
Colour	Grey
Halogen free	Yes
Connection type	Push-in clamp
Surface protection	Untreated
Material quality	Thermoplastic
Material	Plastic
Light value memory	Yes
Substation input	No
Serial dimmer	No
Applicable with movement sensor	No
Applicable with transmission button	No
Applicable with infrared button	No
Applicable with presence indicator	No
Applicable with button	Yes
Applicable with time switch/timer	No
Control voltage	9.5-22.5 V
Transparent	No
Surface finishing	Matt
Core cross section	1.5 mm²
IFTTT support available	No
Dimming phase cut-off	No
Dimming phase cut-on	No
Min. depth of built-in installation box	15 mm
App control via Bluetooth	No
Nominal power resistive load	384 W
Compatible with Apple HomeKit	No
Compatible with Google Assistant	No
Compatible with Amazon Alexa	No

DALI LED dimmer for separate control of brightness and colour temperature. For luminary installation and flush-mounted box. 59x33x15mm. Protection class IP20. Only 0.12 watt standby loss. Designed to control constant voltage LED modules (CV) at operating voltages of 12V to 48V, operating mode DT8: control brightness and colour temperature by a DALI address (Device Type 8, Colour Type Tc) operating mode Balance&Dim: activated via 2 DALI addresses, one to adjust brightness and one to set channel distribution (e.g. colour temperature)·Operating mode Dim2Warm: one DALI address to dim and to change the colour temperature at the same time·SwitchDim2: operation via 2 pushbutton inputs permits control of brightness and colour temperature without DALI. Dimming range 0.1%-100%. Switchable PWM frequency (122Hz/244Hz/488Hz/976Hz). Power supply depending on type from 12V to 28V DC or 12V to 48V DC (depending on operating voltage of LED modules). Connected current 8A. The maximum connected current can be distributed to any channel. High efficiency. Configuration via DALI Cockpit PC software and DALI USB interface. Operating modes: The device has several operating modes: DT8 (as-delivered state): in this mode a DALI address (Device Type 8, Colour Type Tc) is used to control brightness and colour temperature. Alternatively, operation can also take place by one or two pushbutton inputs (SwitchDim2). SwD1: brightness. Press pushbutton briefly: On/Off. Press pushbutton long: Dim. SwD2: Colour temperature. Balance&Dim: Control is by means of 2 DALI addresses (or SwitchDim2). One address is used for dimming and the other for channel distribution (i.e., e.g.: tunable white or direct/indirect lighting distribution). The Balance&Dim mode is used to adjust colour temperature without affecting brightness and vice versa. Adjustment is by means of DALI standard commands such as Dim Up/Down. This permits all customary controls and gateways (e.g. KNX). This control option is an alternative to DT8-Tc mode. Operable via DALI or SwitchDim2: DALI address 1, SwD1: brightness. DALI address 2, SwD2: Balance. Dim2Warm: The two output channels are controlled by a DALI address or an SwD input. Channel distribution is permanently coupled to the dimming value. The smaller the dimming value, the warmer the light. DALI address 1, SwD1: Dim2Warm (Master). Press pushbutton briefly: On/Off. Press pushbutton long: Dim.