Technical Information
Item condition |
New |
Manufacture name |
DALI LED dimmer RGB 8A for flush-mounted box (DT8) |
Brand |
ELTAKO
|
Categories |
Switches
|
Country of origin |
BG |
Harmonized System Code |
8542 3190 00
|
Assembly arrangement |
Basic element |
Method of operation |
Push button |
Nominal voltage |
12-48 V |
Suitable for degree of protection (IP) |
IP20 |
Device width |
33 mm |
Device height |
59 mm |
Device depth |
15 mm |
Max. switching power LED |
384 W |
Packing details
Packing level 1 |
4010312321492, 4010312321492 |
Other Technical data
Mounting method |
Other |
Colour |
Grey |
Halogen free |
Yes |
Connection type |
Push-in clamp |
Surface protection |
Untreated |
Material quality |
Thermoplastic |
Material |
Plastic |
Light value memory |
Yes |
Substation input |
No |
Serial dimmer |
No |
Applicable with movement sensor |
No |
Applicable with transmission button |
No |
Applicable with infrared button |
No |
Applicable with presence indicator |
No |
Applicable with button |
Yes |
Applicable with time switch/timer |
No |
Control voltage |
9.5-22.5 V |
Transparent |
No |
Surface finishing |
Matt |
Core cross section |
1.5 mm² |
IFTTT support available |
No |
Dimming phase cut-off |
No |
Dimming phase cut-on |
No |
Min. depth of built-in installation box |
15 mm |
App control via Bluetooth |
No |
Nominal power resistive load |
384 W |
Compatible with Apple HomeKit |
No |
Compatible with Google Assistant |
No |
Compatible with Amazon Alexa |
No |
Downloads
Description
DALI LED dimmer with RGB colour control for luminary installation and flush-mounted box. 59x33x15mm. Protection class IP20. Only 0.12 watt standby loss. Designed to control constant voltage LED modules (CV) at operating voltages of 12V to 48V, operating mode DT8: a DALI address to control brightness and colour DALI DT8, Type RGBWAF). Operating mode Colour&Dim: activated by 2 DALI addresses, one to adjust brightness and one to set the colour. SwitchDim2: Operation via 2 switch inputs permit brightness and colour to be controlled without DALI. Dimming range 0.1%-100%. Switchable PWM frequency (122Hz/244Hz/488Hz/976Hz). Power voltage 12V to 48V DC (depending on operating voltage of LED modules). Connected current 8A. The maximum connected current can be distributed to the channels as required. Low stand-by losses. High efficiency. Configuration via DALI Cockpit PC software and DALI USB interface. Operating modes: The device has several operating modes: DT8 (as-delivered state): In this operating mode brightness and colour are controlled by a DALI address (Device Type 8). Alternatively, operation can also take place by two pushbutton inputs (SwitchDim2): SwD1: brightness. Press pushbutton briefly: On/Off. Press pushbutton long: Dim. SwD2: Colour. Colour&Dim: This operating mode is used to control RGB luminaries. Control is by means of 2 DALI addresses. One address affects brightness and the other affects channel distribution (e.g.: colour). Colour&Dim mode is used to adjust colour temperature without affecting brightness and vice versa. Adjustment is by means of DALI standard commands such as Dim Up/Down. This permits all customary controls and gateways (e.g. KNX). This control option is an alternative to DT8-RGBWAF mode. Operable via DALI or SwitchDim2: DALI address 1, SwD1: brightness. DALI address 2, SwD2: Colour.