Technical Information
Item condition |
New |
Manufacture name |
LED drivers |
Brand |
Tridonic
|
Categories |
Transformer led
|
Width |
70 mm |
Height |
31 mm |
Housing |
Plastic housing |
Length |
105 mm |
Output voltage |
12-38 V |
Output power |
2.24-14 W |
Degree of protection (IP) |
IP20 |
Output current |
100-500 mA |
Suitable for constant current |
Yes |
Suitable for constant voltage |
No |
No dim function |
No |
Packing details
Packing level 1 |
9006210724232 |
Other Technical data
Protection class |
I |
Model |
Dynamic |
Diameter |
76.56 mm |
Suitable for outdoor use |
Yes |
Suitable for DC-voltage (primary side) |
Yes |
Constant light output (CLO) |
Yes |
IFTTT support available |
No |
Dimming 0-10 V |
No |
Dimming 1-10 V |
No |
Dimming DALI |
Yes |
Dimming DMX |
No |
Dimming potentiometer (integrated) |
No |
Dimming GPRS |
No |
Dimming LineSwitch |
No |
Dimming manufacturer's proprietary system |
No |
Dimming mains voltage modulation |
No |
Dimming phase cut-off |
No |
Dimming phase cut-on |
No |
Dimming programmable |
Yes |
Dimming RF |
No |
Dimming Sine Wave Reduction |
No |
Dimming Touch and Dim |
No |
Dimming Zigbee |
No |
Dimming with push-button |
Yes |
Dimming DSI |
Yes |
Operation by Bluetooth |
No |
Compatible with Apple HomeKit |
No |
Compatible with Google Assistant |
No |
Compatible with Amazon Alexa |
No |
Compatible with Casambi |
No |
Description
Dimmable built-in constant current outdoor LED driver ¦ Dimming range 5 – 100 % (min. 5 mA) ¦ For luminaires of protection class I and protection class II ¦ Temperature protection as per EN 61347-2-13 C5e ¦ Output current adjustable between 100 – 500 mA via NFC, DALI or ready2mains Programmer ¦ Max. output power 14 W ¦ Up to 87 % efficiency ¦ Lowest power input on stand-by < 0.16 W ¦ Article number 28003165: Made in Europe, article number 87500707: Made in China. ¦ Nominal lifetime of 100,000 h and 8 years guarantee (conditions at www.tridonic.com) ¦ Near field communication (NFC) ¦ one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ¦ ready2mains (configuration via mains) ¦ U6Me2 (configuration of chronoSTEP via mains) ¦ Terminal blocks: 45° push terminals ¦ Adjustable output current in 1-mA-steps (NFC, DALI, ready2mains) ¦ Programmable chronoSTEP: times and levels (NFC, DALI, U6Me2, ready2mains) ¦ Dimming through mains voltage (inputDIM) ¦ Enhanced constant light output function (eCLO) ¦ Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) ¦ Intelligent Temperature Guard (ITG) ¦ Intelligent Voltage Guard Plus (IVG+) ¦ Suitable for emergency escape lighting systems acc. to EN 50172 ¦ Flexible configuration via companionSUITE (NFC, DALI, ready2mains™) or U6Me2 programmer ¦ Application-oriented operating window for maximum compatibility ¦ Best energy savings due to low stand-by losses and high efficiency ¦ In-field programming possible after installation with NFC interface and ready2mains ¦ High overvoltage protection: up to 10 kV asymmetric (protection class I and II) ¦ Road, street and industry