Item condition | New |
Manufacture name | LED Luminaire with Strip - 1x50W 150cm 8000lm 4000K UGR |
Brand | Shada |
Categories |
Wall and ceiling luminaires
Ceiling light |
Country of origin | CN |
Width | 75 mm |
Colour housing | Grey |
Colour rendering index CRI | 80-89 |
Length | 1500 mm |
Height/depth | 75 mm |
Lamp type | LED not exchangeable |
Impact strength | IK08 |
Nominal voltage | 220-240 V |
Degree of protection (IP) | IP65 |
Beam angle | Extreme wide beam >80° |
Max. system power | 50 W |
Packing level 1 | 8720246201987 |
Protection class | I |
Voltage type | AC |
Type of control gear | Electronic ballast |
Suitable for suspended mounting | No |
Housing material | Plastic |
Material cover | Other |
With light source | No |
Suitable for built-in mounting | No |
Suitable for surface mounting | No |
Nominal current | 242 mA |
Colour of light | White |
Rated life time L70/B50 at 25 °C | 50000 h |
Rated life time L80/B10 at 25 °C | 30000 h |
Colour consistency (McAdam ellipse) | SDCM5 |
Total harmonic distortion | 20 |
Photobiological safety according to EN 62471 | RG0 |
Rated ambient temperature according to IEC62722-2-1 | -25-40 °C |
Filament test according to IEC 60695-2-11 | 850 °C - 30 s |
Dimming 0-10 V | No |
Dimming 1-10 V | No |
Dimming DALI | No |
Dimming DMX | No |
Dimming potentiometer (integrated) | No |
Dimming GPRS | No |
Dimming LineSwitch | No |
Dimming manufacturer's proprietary system | No |
Dimming mains voltage modulation | No |
Dimming phase cut-off | No |
Dimming phase cut-on | No |
Dimming programmable | No |
Dimming RF | No |
Dimming Sine Wave Reduction | No |
Dimming Touch and Dim | No |
Dimming Zigbee | No |
Dimming with push-button | No |
No dim function | Yes |
Light distributor | Other |
Energy efficiency class of the provided exchangeable built-in lamp | D |
Highest energy efficiency class of the exchangeable lamp | D |
Lowest energy efficiency class of the exchangeable lamp | D |
Unified Glare Ratio (UGR) | 21 |
Max. number of luminaires per miniature circuit breaker B16 | 48 |
Suitable for ceiling mounting | Yes |
Power factor | 0.9 |
The LED TL Luminaire with strip gives a beautiful uniform light, which is perfect for workplaces, garages, sheds, and smaller warehouses.
The light source is incorporated in the fixture and emits a neutral white light that is flicker-free. Additionally, the luminaire has a high luminous efficacy and is highly impact resistant thanks to its housing made of polycarbonate.
The aluminum clamps are made of stainless steel and ensure that the LED module is pressed tightly against the housing, making the luminaire dust tight and waterjet protected. Besides that, the LED module is attached to the housing with a strip making it together with the push terminals a luminaire that is very easy and quick to install.
In addition, the luminaire is delivered with rubbers of multiple sizes that ensure that almost every cable size can be used for installation and the module and Tridonic driver are easy to replace, ensuring a long lifespan.
The luminaires can also be linked to each other, which is ideal for illuminating large spaces.