Technical Information
Item condition |
New |
Manufacture name |
Merten - USB charger + schuko socket-outlet - 2.4A 16A - champagne |
Brand |
Schneider Electric
|
Categories |
Electrical socket
|
Country of origin |
CN |
Nominal current |
16 A |
Nominal voltage |
250 V |
Mounting method |
Flush mounted (plaster) |
Colour |
Gold |
Model |
Protective contact (type F) |
Halogen free |
Yes |
Number of units |
3 |
Lockable |
No |
With hinged lid |
No |
Connection type |
Screwed terminal |
Surface protection |
Untreated |
With signal lamp |
No |
Number of phases |
1 |
With enhanced contact protection |
No |
Frequency |
50-60 Hz |
With on/off switch |
No |
Protective contact |
Yes |
Label space/information surface |
No |
Eject-mechanism |
No |
Material quality |
Thermoplastic |
Rotated central insert |
No |
Over voltage protection |
No |
Fault current protection |
No |
Special power supply |
No special power supply |
Insulated mounting |
No |
Material |
Plastic |
Rated fault current |
0 mA |
Type of fastening |
Mounting with claw and screw |
RAL-number (similar) |
0 |
Impact strength |
IK03 |
Transparent |
No |
Surface finishing |
Glossy |
With miniature fuse |
No |
With loop through function |
No |
Suitable for degree of protection (IP) |
IP20 |
Device width |
71 mm |
Device height |
71 mm |
Device depth |
44 mm |
Number of socket outlets switchable |
0 |
With function lighting |
No |
With orientation lighting |
No |
With built-in USB power supply |
Yes |
Number of modules (module system) |
0 |
Number of active pins (round) |
2 |
Number of active pins (flat) |
0 |
Protective earth pin round |
No |
Min. depth of built-in installation box |
40 mm |
Anti-bacterial treatment |
No |
Packing details
Packing level 1 |
3606489429928 |
Packing level 2 |
3606489429926 |
Downloads
Description
Schneider Electric Merten USB charger + socket-outlet MTN2366-6051 is in color champagne. Its connection terminals are screwless terminals. With side earth. Its connector is USB port, socket-outlet, And this device is Schuko standard. It is 71 mm in width, 71 mm in height, 44 mm in depth, with an embedding depth of 32 mm. The pole configuration of the outlet is 2P + E. The USB charger + socket-outlet is made of PC (polycarbonate), making it as resistant as possible. The protection type is 1 external fuse, against short-circuits, automatic overload protection, automatic restart after ground fault or main power loss, battery charge protection, thermal protection, improving safety level. Besides it is halogen free, lead free halogen free, lead free, which is good for your health. It reaches IP20 degree of protection too. It obtained CB, FIMKO, KEMA-KEUR, NEMKO, SEMKO, VDE certificate as well. What's more, it well satisfied the standard of DIN VDE 0620-1, EN/IEC 60950, IEC 60884-1, NEN-EN 50198-2.