Free shipment from 5000 EUR! Our warehouse is ready to store your orders until the required amount is reached
Wireless 4-way universal transmitter module
In stock: No
Vendor stock: No
Minimal order quantity: 1
Price (excl. VAT):
48,22 €
EAN: 4010312321386
MPN: 30000301
Package: 1
Technical Information
| Item condition | New |
| Manufacture name | Wireless 4-way universal transmitter module |
| Brand | ELTAKO |
| Categories |
Switches |
| Country of origin | CN |
| Harmonized System Code | 8526 9200 00 |
| Current supply | Other |
| Range | 30 m |
| Rolling code system | No |
| Number of commands | 4 |
| Flush-mounted radio transmitter | No |
| Surface mounted radio transmitter | No |
| Keyboard protection cover | No |
| Radio frequency | 868 MHz |
| With manual radio transmitter | No |
| With radio coding device | No |
| Degree of protection (IP) | IP20 |
Packing details
| Packing level 1 | 4010312321386, 4010312321386 |
| Packing level 2 | 4010312321386 |
| Packing level 3 | 4010312321386 |
Downloads
Description
Wireless 4-way universal transmitter module. With internal antenna. With battery (lifetime 5-8 years). For installation. 45mm long, 45mm wide, 18mm deep. This transmitter module has four channels to transmit wireless telegrams to the Eltako Wireless Building system like a 4-channel wireless pushbutton. E1 initiates a wireless telegram such as Press top rocker of a wireless pushbutton with a rocker. E2 initiates Press bottom rocker (or right rocker of a wireless pushbutton with double rocker in each case). E3 initiates like Press left top rocker of a wireless pushbutton with a double rocker and E4 initiates like Press left bottom rocker of a wireless pushbutton with a double rocker. When the control contacts are opened, the telegram is the same as Release wireless pushbutton. The control inputs can be activated by internally placed jumpers either for pushbuttons (as-delivered state), window/door contacts or motion detectors. With a cable length up to 10 metres, conventional pushbuttons, window/door contacts or floating motion detector contacts can be connected to terminals E1, E2, E3 and E4. The opposite pole in each case is GND. The electronics is powered by an internal button cell CR2032. To replace the battery or activate battery supply, open the housing and remove an insulation strip. The housing must also be opened to select the modes. To open the housing, use a screwdriver to release the tabs on the lid and then remove the lid.