Free shipment from 5000 EUR! Our warehouse is ready to store your orders until the required amount is reached
Wireless motion sensor in E-Design55, anthracite mat
In stock: No
Vendor stock: No
Minimal order quantity: 1
Price (excl. VAT):
59,50 €
EAN: 4010312322321
MPN: 30055513
Package: 1
Technical Information
| Item condition | New |
| Manufacture name | Wireless motion sensor in E-Design55, anthracite mat |
| Brand | ELTAKO |
| Categories |
Switches
|
| Country of origin | CN |
| Harmonized System Code | 8526 9200 00 |
| Mounting method | Surface mounted (plaster) |
| Colour | White |
| Model | Movement sensor |
| Halogen free | Yes |
| Creep-under protection | No |
| Staircase monitoring | Yes |
| Suitable for wireless transmission | Yes |
| Material quality | Thermoplastic |
| Max. transmission range frontally | 30 m |
| Max. transmission range sideways | 30 m |
| Material | Plastic |
| Response value sensitivity adjustable | No |
| Dim function with dimmer basic element | No |
| Diameter detection range on floor | 10 m |
| HVAC-control | Yes |
| Constant light control | No |
| Mounting height | 3 m |
| Teach-function for response value luminosity | - |
| Networkable | Yes |
| Operation mode switch | No |
| Animal zone | No |
| Detection angle horizontal | 30 ° |
| Suitable for degree of protection (IP) | IP30 |
| Response value luminosity adjustable | No |
| Switch-off delay self-learning | No |
| With orientation lighting | No |
| IFTTT support available | No |
| Compatible with Apple HomeKit | No |
| Compatible with Google Assistant | No |
| Compatible with Amazon Alexa | No |
| Combination movement sensor/push button switch | No |
Packing details
| Packing level 1 | 4010312322321, 4010312322321 |
| Packing level 2 | 4010312322321 |
Downloads
Description
Wireless motion sensor for surface mounting 80x80x27mm or mounting into the E-Design55 switching system. With battery (lifetime 3 years). The FB55EB- sends a motion-detected telegram every 2 minutes when motion is detected. If no more movement is detected, a non-movement telegram is sent after 4 minutes. If there is still no movement detected, a non-movement telegram is sent every 30 minutes. In the factory setting, the upper slide switch is set to P (passive), light actuators and dimming actuators switch off automatically if no new movement has been detected for 5 minutes. It is switched on with a button. With the upper slide switch in position A (active), automatic movement-dependent switch-on is activated. The sensitivity can be selected with the lower slide switch. H = high (factory setting) or L = low. The power supply is an internal 3V CR2032 button cell and has a service life of several years. Just remove the front panel to change the button cell.