Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
Charging Cable (Mode 2), Typ 2, Schuko 13A, 8m VDE |
Marque |
Mennekes
|
Catégories |
Câble de charge pour véhicule électrique
|
Pays d’origine |
DE |
Code du système harmonisé |
8544 4290 00
|
Courant nominal |
13 A |
Tension nominale |
230 V |
Type de courant |
AC monophasé |
Avec capteur de température |
Yes |
Nombre de conducteurs de communication |
2 |
Type côté véhicule |
Type 2 |
Type côté infrastructure |
Fiche de contact de protection |
Avec boîtier de contrôle des câbles (ICCB) |
Yes |
Mode de chargement |
Mode 2 |
Détails d’emballage
Niveau d’emballage 1 |
4015394295051 |
Description
EV-charging cable mode 2 Gen 2 acc. to IEC 62752 consisting of: Vehicle side: charging coupler 30° type 2, With protection cap according to IEC 62196-2 230V 13A 1P+N+PE plus 2 signal contacts 0,5mm² between CP and IC-CPD 680 ohms resistance coding between PE and PP inside charging coupler of the type 2 plug Connection cable 3x2,5+1x0,5mm² PUR blue Infrastructure side: SCHUKO®-plug AF* with temperature sensor and protective earth connection German and French/Belgo* norm cable cross-section 3G2,5 + 2 x 0,5qmm MENNEKES IC-CPD 2, IP69k, RCD Type A (I=30mA) + DC(I=6mA), upper case blue coloured Charge current of 13A Multi-stage temperature management Automatic charging current reduction in case of overheating of SCHUKO®- plug or IC-CPD Miswiring Detection Automatic resumption of charging process once voltage has been re- established Length between SCHUKO®-plug and IC-CPD 0,3m. Overall length 8m No UL approval! Device fulfils emobility standards, e.g. IEC 62752! Additional requirements outside the standards like Z.E. Ready are not ensured.