Multivar luminaire systems Coriflex Reflector White ETDD 52W 5200lm Wide (W) IP40 IK07 3 SDCM

LED rapid mounting luminaire, Version as single LED luminaire or continuous line starting module. With micro louvre for good glare reduction. Direct distribution. Fixing either via wire or chain suspension or direct to ceiling. Modules can be replaced without tools. In combination with blind modules, the position of continuous line modules can be changed without tools within a continuous line. Optical system consists of a PMMA refractor-reflector system with centrally integrated high power LEDs. With micro louvre for good glare reduction. With symmetric wide light intensity distribution. Luminaire luminous flux and light color fixed. Luminaire luminous flux 5200 lm, connected load 52 W, maximum luminous efficiency of luminaire 100 lm/W. Light colour warm white, correlated colour temperature (CCT) 3000 K, general colour rendering index (CRI) Ra > 80. Colour locus tolerance (initial MacAdam) ≤ 3 SDCM. Mean rated service life L80(tq 25 °C) = 70,000 h, mean rated service life L85(tq 25 °C) = 50,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Outer module housing of extruded aluminium with precise, flat visible surfaces and fine edge radii. Inner support profile, of sheet steel. Surface coated white (RAL 9016). Module length: 1130 mm. Permissible ambient temperature (ta): -20 °C - +25 °C. Safety class (EN 61140): I, protection rating (DIN EN 60529): IP40, impact resistance level in accordance with IEC 62262: IK07, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. Weight: 4,2 kg. Connection to ceiling-sided mains cable possible with integrated 7-pole plug terminal to 2.5 mm2. With electronic transformer, digitally dimmable (DALI). Control gear unit according to DALI-2 standard (EN 62386). Luminaire is switchable and dimmable by means of touch functionality via DALI control terminals (Touch DIM). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). The luminaire can be equipped with the Monitoring Ready (MOR) functionality on request. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. The luminaire is also ENEC-certified by an independent testing authority.