Versatile outdoor post luminaire in minimalist, international design with flat construction. With an intelligent label for quick access to luminaire information by means of QR code. Compact version, length of luminaire head 450mm. To be used as a post-top luminaire (spigot measurement Ø76 mm/ Ø60 mm, Jovie Z MB D.) or bracket-mounted luminaire (spigot measurement Ø42 mm/ Ø60 mm, Jovie A Z MB D...) in combination with the post fixing to be ordered separately.. The inclination of the luminaire head can be adjusted. Inclination angle for bracket-mounting o°, -5°, -10°, Inclination angle for post-top mounting 0°, 5°, 10°, 15°.. As MLT version (Multi-Lens Technology), consisting of highly efficient UV and temperature-resistant lens systems in 4-fold configurations. Asymmetric wide light distribution for road illumination in compliance with P lighting classes and M lighting classes with road width to mounting height ratio of up to 2.0. Further beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The light source can be replaced by skilled personnel. The LED system consists of MLT LED modules with 4 LEDs each. Number of modules: 6. Luminaire luminous flux 6.800 lm, connected load 59,0 W, luminous efficiency of luminaire 115 lm/W. Power factor λ 0,90. Efficiency version with material-optimised number of LEDs. General Colour rendering index (CRI) > 70, correlated colour temperature (CCT) 4000 K. Further LED light colours available on request. Nominal rated service life LCLO (tq 25 °C) 100.000. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Luminaire body of die-cast aluminium. Colour DB703 micaceous iron oxide. Sea weather-suitable coating on request. With PMMA cover, printed. The cover can be individually printed on customer request. Visible label protected against weather impact behind the cover on request. Safety class (EN 61140): 02, protection rating (DIN EN 60529): 66, impact resistance level in accordance with IEC 62262: IK09. Mast available upon request. Windage area Fw (m²) = 0. Weight: 4,8 kg. The luminaire is connected without opening the luminaire body by means of the connection cable routed to the outside. The operating device can be replaced by qualified personnel. Length of connection cable: 8 m. With electronic control gear unit and Smart Lighting Ready equipment (SLR) for Retroactive integration of components for lighting management systems. Standardised Zhaga-compliant bases are at the top on the luminaire head and on the lower cover. Parametrierbares Vorschaltgerät mit Lichtstromkonstanthaltung (CLO). Connected load at the end of service life: 62,00 W. Control gear unit according to DALI-2 standard (EN 62386). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). The luminaire is compliant with requirements of applicable EU guidelines and product safety legislation(CE label). In addition, the luminaire is ENEC-certified by an independent testing centre. Surge voltage resistance Differential Mode / Common Mode: 6 kV / 10 kV. The luminaire is compliant to the requirements of EN 60598 and is designed for the effects of wind compliant to EN 1991 (Eurocode) with basic wind velocity of up to 30m/s (corresponding to wind zone 4 in Germany) in terrain category 1. A snow load (up to 1kN/m²) and icing (up to 2 cm) at a mounting height in accordance with the mounting instructions are taken into account. Not considered are exposed locations (e.g. bridges, installation on buildings or directly adjacent to railway tracks). Impact loads are not considered.With Trilux after-sales promise: the luminaire is available for 10 years and spare parts (LED module, control gear unit and optical system) are available for 15 years from date of invoice. The right to make reasonable modifications in the interests of progress is reserved.
