Livraison gratuite à partir de 5000 EUR! Notre entrepôt est prêt à stocker vos commandes jusqu'à ce que le montant requis soit atteint
Recessed luminaires Arimo Fit C Prisms White ET 31W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 8160040 image 1
Recessed luminaires Arimo Fit C Prisms White ET 31W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 8160040 image 2
Recessed luminaires Arimo Fit C Prisms White ET 31W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 8160040 thumbnail 1
Recessed luminaires Arimo Fit C Prisms White ET 31W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 8160040 thumbnail 2

Recessed luminaires Arimo Fit C Prisms White ET 31W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 8160040

En stock: Non Stock fournisseur: Non Quantité minimale de commande: 1
Prix (hors TVA):
263,08 €
Ce prix est valable jusqu’au 24.12.24
EAN: 4018242675401
MPN: 8160040
Colis: 1
Palette: 34

Technical Information

État de l’article Nouveau
Nom du fabricant Recessed luminaires Arimo Fit C Prisms White ET 31W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 8160040
Marque TRILUX
Catégories Wall and ceiling luminaires
Pays d’origine DE

Détails d’emballage

Niveau d’emballage 1 4018242675401, 4018242675401
Niveau d’emballage 2 4018242675401

Description

Rectangular recessed LED luminaire with microprismatic cover PW. Version M57 (312.5 mm x 1250 mm). Optionally, the luminaire can be equipped with an emergency light system for ceiling recessing with an emergency light operation time of 3 hours. In emergency light operation, the luminaire luminous flux is 500 lm. Generation of an enhanced depth effect in the room. For system ceilings with exposed grids. The luminaire body is flush with the ceiling system on the room side. In combination with accessories to be ordered separately, suitable for plasterboard ceiling openings and for flush ceiling surface mounting. The Sky frame, optionally available as an accessory, creates a room-atmospheric depth effect in the classic, flat modular ceiling; the 3-dimensional contour of a skylight is reproduced. The optical system consists of a highly efficient PMMA cover with microprisms. The microstructured PMMA prism surface of the optical system has a glare-reducing effect, is non-yellowing and does not cloud. With symmetric limited wide light distribution. Glare evaluation according to UGR rating (EN 12464-1) < 19. Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 3000 cd/2 for beam angle above 65° all-round. Harmonious light effect due to homogeneously illuminated light emission. Individual design of the light emission surface (e.g. with printing) and other special solutions are possible on request. Luminaire luminous flux and light color fixed. Luminaire luminous flux 4200 lm, connected load 31 W, maximum luminous efficiency of luminaire 135 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Colour locus tolerance (initial MacAdam) ≤ 3 SDCM. Mean rated service life L80(tq 25 °C) = 100,000 h, mean rated service life L90(tq 25 °C) = 50,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Luminaire body of extruded aluminium profile. Surface coated white (RAL 9016). Luminaire dimensions (L x W x H): 1245 mm, 308 mm, 22 mm. The all-round edge of the frame profile assists mounting. The luminaire frame is profiled in a 3-dimensional way to generate a depth effect on the ceiling. Luminaire can be covered with insulatin material at ta 25°C, ta35 °C without insulation materila can be also be used. Safety class (EN 61140): II, protection rating (DIN EN 60529): IP20, Protection rating on room side: IP40, impact resistance level in accordance with IEC 62262: IK03, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. Weight: 3,6 kg. Polarity-protected rapid connection with mains through-wiring up to Ø 2.5 mm2. Connection of the ballast unit to the luminaire (Plug ‘N Play). The luminaire’s packaging concept facilitates separate removal of the control gear unit for pre-assembly, leaving the remaining luminaire components protected until final assembly. With external operating device, switchable. The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Control gear unit is open-circuit proof and protected against faulty connection, short circuit, overload and overtemperature. Output ripple of the control gear unit ≤ 4 % for effective control of the LED system and for flicker-free light. The ENEC certification by an independent testing laboratory is in preparation. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. The luminaire is part of a range of recessed, surface-mounted and suspended luminaires with a harmonised appearance. The application variety of the product series is underlined by variants regarding luminous flux packages, light distribution curves and protection ratings. On request, the basic range can be expanded with project-specific luminaire features. Luminaire available for 10 years, spare parts (LED module, control gear unit, optical system) for 15 years from date of invoice, subject to reasonable modifications in the interests of progress.