S3000 electr.swit.ins. Insert

État de l’article	Nouveau
Nom du fabricant	S3000 electr.swit.ins. Insert
Marque	Gira
Catégories	Interrupteurs
Pays d’origine	DE
Code du système harmonisé	8536 5080 00
Tension nominale	0 V
Méthode de montage	Montage encastré (plâtre)
Couleur	Autre
Fréquence	NA Hz

Niveau d’emballage 1	4010337048299
Niveau d’emballage 2	4010337048299

Disposition de l'assemblage	Élément de base
Modèle	Autre
Protection de surface	Autre
Courant nominal	0 A
Nombre de canaux	NA
Qualité des matériaux	Autre
Type de charge	Autre
Matériau	Autre
Type de fixation	Montage avec griffe et vis
Mémoire de la valeur lumineuse	No
Entrée de la sous-station	-
Numéro RAL (similaire)	0
Capacité de commutation CVC	NA W
Applicable avec un capteur de mouvement	-
Applicable avec bouton de transmission	-
Applicable avec bouton infrarouge	No
Applicable avec indicateur de présence	-
Applicable avec bouton	Yes
Applicable avec minuterie/interrupteur	No
Capacité de commutation	NA W
Transparent	No
Prise en charge IFTTT disponible	No
Profondeur minimale de la boîte d'encastrement	0 mm
Compatible avec Apple HomeKit	No
Compatible avec Google Assistant	No
Compatible avec Amazon Alexa	No

System 3000 electronic switching insert Features: Connecting auxiliary units is possible. Control of thermal servos in combination with a room temperature controller top unit. Bulb-saving switch-on. Electronic short-circuit protection. Electronic excess-temperature protection. Operation with and without neutral conductor connection. Operation with a neutral conductor: Switching of light bulbs, HV halogen lamps, electronic or inductive transformers with halogen or LED lamps, switchable or dimmable HV LED lamps or compact fluorescent lamps. Device is powered via the phase conductor and neutral conductor, therefore no leading edge or trailing edge phase control. Operation without a neutral conductor: Switching of light bulbs, HV halogen lamps, electronic or inductive transformers with halogen or LED lamps, dimmable HV LED lamps or compact fluorescent lamps. Device is powered via the the phase conductor and therefore works according to the leading edge or trailing edge principle. Automatic or manual setting of dimming principle according to load (leading or trailing edge). Display of the selected operating mode using LED. Combination with RF operating top unit, 1-gang 2-gang for KNX: Switching actuator channel, 1-gang or heating actuator, 1-gang. Sensor channel, 1-gang or 2-gang. Local control of System 3000 insert possible. Wireless control of other devices for KNX as sensor possible. Temperature detection Insert function selection for switching: NO NC operation, staircase function with switch-off pre-warning, scene function (16 scenes), blocking function, time delays. Auxiliary input can be used as an additional operating point for the System 3000 insert or for wireless control of other devices for KNX as a sensor. Insert function selection for room temperature controller: Control of 230 V servos, heating mode, cooling mode, heating and cooling mode, switchover to heating or cooling mode via communication object or auxiliary input. PWM and 2-point controller, absolute and relative setpoint setting, heating requirement control incl. cascading, valve protection function. Cyclical monitoring of the floor temperature, service mode for valve output, frost protection function (automatic or via communication object), temperature sensor calibration, boost function, summer and winter compensation, scene function (16 scenes). Auxiliary input can be used as an additional operating point for the System 3000 insert or for wireless control of other devices for KNX as a sensor. Alternatively, the auxiliary input can be parameterised for switching between heating and cooling mode. Notes : For operation without a neutral conductor, the minimum load for light bulbs, HV halogen lamps, Tronic transformers, and wound transformers increases to 50 W. If the ambient temperature is higher than 25 C, the connected load must be reduced.