Surface-mounted luminaire Montigo Diffuser White rectangular ET 13W 1500lm Lambertian (L) IP40 IK02 3 SDCM

Surface-mounted LED luminaires for ceiling and wall mounting. With opal PMMA diffuser, finely structured. With Lambertian light distribution. Glare evaluation according to UGR rating (EN 12464-1) < 25. Secure fixing of diffuser with inner spring-tensioned contact clips. Luminaire luminous flux and light color fixed. Luminaire luminous flux 1500 lm, connected load 13 W, maximum luminous efficiency of luminaire 115 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Colour locus tolerance (initial MacAdam) ≤ 3 SDCM. Mean rated service life L80(tq 25 °C) = 35,000 h, mean rated service life L70(tq 25 °C) = 50,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Luminaire body sheet steel. Surface coated white (RAL 9016). End caps of impact-resistant ABS. With integral cable channel on rear for cable routing with offset wall outlets. Side cable entry is in end cap. Dimensions (L x W) 633 mm x 111 mm, luminaire height 101 mm. Permissible ambient temperature (ta): -20 °C - +. Safety class (EN 61140): I, protection rating (DIN EN 60529): IP40, impact resistance level in accordance with IEC 62262: IK02, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. Weight: 2,3 kg. With electronic transformer, switchable. The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. The luminaire is also ENEC-certified by an independent testing authority.