Wall and ceiling luminaire Skeo Q Multi-component Reflector Anthracite ETDD 25W 820lm asymmetric wide (AB) IP65 IK08 3 SDCM

Cubic, decorative LED wall luminaire with IP65 protection rating. Cover of hardened highly transparent glass. With two light emission areas, direct-indirect distribution. Can also be used holistically inside buildings. Surface-mounted luminaire for wall mounting. Luminaire is fixed with cast aluminium mounting plate. Specular optic of photometrically high-efficiency aluminium. With asymmetric wide light distribution. With asymmetric narrow and asymmetric wide light distribution. Luminaire luminous flux 820 lm, connected load 25 W, maximum luminous efficiency of luminaire 33 lm/W. Light colour warm white, correlated colour temperature (CCT) 3000 K, general colour rendering index (CRI) Ra > 80. Colour locus tolerance (initial MacAdam) ≤ 3 SDCM. Mean rated service life L80(tq 25 °C) = 50,000 h. Luminaire body of die-cast aluminium. Luminaire body anodised, primed and powder-coated. Surface anthracite coated (DB 703). On request the luminaire body can be provided without added cost in the following colours: black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), white textured (Akzo Nobel 8158870, similar to RAL 9016, V6), grey textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other colour variants are available for an additional charge in accordance with the RAL or DB colour code. Dimensions (L x W): 150 mm x 150 mm, luminaire height 150 mm. On request the luminaire body can be provided without added cost in the following colours: black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), white textured (Akzo Nobel 8158870, similar to RAL 9016, V6), grey textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other colour variants are available for an additional charge in accordance with the RAL or DB colour code. Safety class (EN 61140): I, protection rating (DIN EN 60529): IP65, impact resistance level in accordance with IEC 62262: IK08. Weight: 2,8 kg. The luminaire is suitable for operation on a 230V direct voltage supply grid (DC). With electronic transformer, digitally dimmable (DALI). Control gear unit according to DALI-2 standard (EN 62386). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). The luminaire is suitable for operation on a 230V direct voltage supply grid (DC) Surge voltage resistance Differential Mode / Common Mode: 4 kV / 2 kV. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol.