Technical Information
État de l’article |
Nouveau |
Nom du fabricant |
Window contact with reed relay. 1 NC contact 5VA/175V UC |
Marque |
ELTAKO
|
Catégories |
Interrupteurs
|
Pays d’origine |
US |
Code du système harmonisé |
8536 5080 00
|
Alimentation en courant |
Autre |
Portée |
30 m |
Système de code déroulant |
No |
Nombre de commandes |
2 |
Émetteur radio encastré |
No |
Émetteur radio en saillie |
No |
Couvercle de protection du clavier |
- |
Fréquence radio |
868 MHz |
Avec émetteur radio manuel |
No |
Avec dispositif de codage radio |
No |
Degré de protection (IP) |
IP20 |
Détails d’emballage
Niveau d’emballage 1 |
4010312903001, 4010312903001 |
Niveau d’emballage 2 |
4010312903001 |
Niveau d’emballage 3 |
4010312903001 |
Téléchargements
Description
Window contact with reed relay. 1 NC contact, switching capacity 5W or VA. Switching voltage max. 175V UC. The enclosed window contact consists of a Reed relay with terminals and a solenoid. The NC contact opens when the solenoid approaches closer than 25mm. The disconnection relay ETR61NP is connected to terminals T1 and T2. Power supply to the extractor only cuts in when the window is open. ETR61NP can be wired in the flush mounted socket behind the socket for the extractor. Mounting the window contact FK: Lever out the inserts at the narrow end of the housing. Wire up the Reed relay and cut out the cable entry on the housing. Affix the two housings in parallel maximum 15mm apart and also screw if necessary. In the longitudinal direction the solenoid may be twisted in any direction compared to the Reed relay.