Livraison gratuite à partir de 5000 EUR! Notre entrepôt est prêt à stocker vos commandes jusqu'à ce que le montant requis soit atteint
Wireless 2-fold transmitter module image 1

Wireless 2-fold transmitter module

Prix (HT):
44,21 €
Ce prix est valable jusqu’au 2024-12-31
Prix par m: 44,21 €
EAN: 4010312300152
MPN: 30000300
Notre entrepôt: Non Stock fournisseur: Non
Par colis: 1 Par boîte: 1 Par palette: N/A
Données techniques
État de l’article Nouveau
Nom du fabricant Wireless 2-fold transmitter module
Marque ELTAKO
Catégories Interrupteurs
Pays d’origine CN
Code du système harmonisé 8526 9200 00
Alimentation en courant Autre
Portée 30 m
Système de code déroulant No
Nombre de commandes 2
Émetteur radio encastré No
Émetteur radio en saillie No
Couvercle de protection du clavier No
Fréquence radio 868 MHz
Avec émetteur radio manuel No
Avec dispositif de codage radio No
Degré de protection (IP) IP20
Détails d’emballage
Niveau d’emballage 1 4010312300152, 4010312300152
Niveau d’emballage 2 4010312300152
Niveau d’emballage 3 4010312300152
Downloads
Description
Wireless 2-fold transmitter module. With internal antenna. No standby loss. For installation. 45mm long, 45mm wide, 18mm deep. The wireless transmitter module FSM61-UC has two channels and can transmit wireless pushbutton telegrams to the Eltako building wireless system. A1 initiates a wireless telegram, such as Press top rocker for a wireless pushbutton with one rocker and A3 such as Press bottom rocker. The telegram on opening the two control contacts is identical to Release wireless pushbutton. Severel wireless transmitter modules must not be switched at the same time. The universal control voltage at +An/-A2 processes control commands of 8 to 253V AC or 10 to 230V DC with periods lasting min. 0.2 seconds. Max. parallel capacitance (approx. length) of control lead at 230V 5nF. This correspond to a length of approx. 20 meters. If the terminals A1 and A3 are connected with a bridge, the wireless telegram is transmitted once per minute by A3, provided the control voltage is applied, e.g. for central commands with priority. No permanent power supply required, therefore no standby losses. The rotary switch is required for the activation or deactivation of encryption and is set to AUTO in operation. Activate encryption: Turn the rotary switch to the right stop (position key) and press once. Deactivate encryption: Turn the rotary switch to the left stop (position crossed out key) and press once.